CHLORINATOR SALINE
Tired of Chlorine?
SALICLOR-SALT CHLORINATOR
With the salt chlorinator you can avoid chlorine allergies, alleviate the symptoms of skin diseases, keep your pool water in perfect health conditions. We have different models and typologies:
INSTALLATION DRAWING
TOUCH SCREEN
Operating screen: All data relevant to the normal operation of the equipment are displayed.
Programming screen: All parameters that affect the operation of the equipment can be modified.
Calibration screen: All measurements detected by the equipment can be digitally calibrated.
Information screen: Additional information on the use of the equipment is displayed.
L SERIES
LS SERIES
LMG SERIES
Salt chlorination SERIES L
|
Cota |
Millimeters |
Inches |
|
A (ext. Ø) |
Ø 63 mm. |
Ø 2.48 inc. |
|
A (Ø int.) |
Ø 50 mm. |
Ø 1.97 inc. |
|
A1 |
120 mm. |
4.72 inc. |
|
B (ext. Ø) |
Ø 105 mm. |
Ø 4.13 inc. |
|
C |
290 mm. |
11.42 inc. |
|
Thread |
Ø 120 mm. |
Ø 4.72 inc. |
L SERIES
SERIE L control PH integrado
SERIE L control PH REDOX integrado
TECHNICAL DATA
Operating voltage. -230 V ac 50/60 Hz.
Output (Adc). -5 Volt.
max. pool m3 22º C. -50
Maximum pressure. -7.5 Kg/cm2 105 PSI
Connection to pipeline. -Ø 50mm and 63mm
Watt consumption. -50 W (9 Amp)
Production gr Cl-/hr. -14
Minimum flow rate m3/h. -6 m3/h
No. of electrode plates. -2L
Operating voltage 230 V ac 50/60 Hz.
Watt consumption 90 W (18 Amp)
Output (Adc) 5 Volt.
Production gr Cl-/hr 25
m3 max. pool 22º C 80
Minimum flow rate m3/h 10 m3/h
Maximum pressure 7.5 Kg/cm2 105 PSI
No. of electrode plates 4S
Connection to pipe Ø 50mm and 63mm
Operating voltage 230 V ac 50/60 Hz.
Watt consumption 115 W (22 Amp)
Output (Adc) 5 Volt.
Production gr Cl-/hr 34
m3 max. pool 22º C 120
Minimum flow rate m3/h 15 m3/h
Maximum pressure 7.5 Kg/cm2 105 PSI
No. of electrode plates 4L
Connection to pipe Ø 50mm and 63mm
Operating voltage 230 V ac 50/60 Hz.
Watt consumption 150 W (30 Amp)
Output (Adc) 5 Volt.
Production gr Cl-/hr 45
m3 max. pool 22º C 180
Minimum flow rate m3/h 18 m3/h
Maximum pressure 7.5 Kg/cm2 105 PSI
No. of electrode plates 6S
Connection to pipe Ø 50mm and 63mm
Operating voltage 230 V ac 50/60 Hz.
Watt consumption 175 W (52 Amp)
Output (Adc) 5 Volt.
Production gr Cl-/hr 52
m3 max. pool 22º C 220
Minimum flow rate m3/h 20 m3/h
Maximum pressure 7.5 Kg/cm2 105 PSI
No. of electrode plates 6L
Connection to pipe Ø 50mm and 63mm
Salinity
- 4 g/l – sea water.
- 6 g/l recommended.
Flow detector
- Always active.
- Automatic stop of the equipment.
- It is not effective in closed bypasses.
Flow detector by flow switch
- Optional.
- Requires function in the purchase.
- Automatic flow switch detection.
Production control
- Digital control from 1% to 100%.
- 100 production levels.
- 100% hyperchlorination with automatic shut-off.
Polarity reversal
- Configurable by digital menu.
- 1h, 2h, 3h and 4h
Electrode diagnostics
- Displayed information on the approximate percentage of remaining electrode life.
pH dosing control
- Yes.
- Controlled dosing every hour with the dosing time of the reducing agent depending on the water treatment capacity of each unit.
- The equipment will not dose above pH 9 as this may be due to a probe reading error.
Salinity Control
- Continuous reading of the salt level in water in g/l.
- Accurate with water temperatures between 21º and 23º C.
- The precision temperature KIT can be ordered at any time.
Salt alarm indicator
- Yes.
- It will warn on the display below 5 g/l.
- It will indicate the amount needed to add more salt to the water.
Salt chlorination LS SERIES
|
Cota |
Millimeters |
Inches |
|
A (ext. Ø) |
Ø 63 mm. |
Ø 2.48 inc. |
|
A (Ø int.) |
Ø 50 mm. |
Ø 1.97 inc. |
|
A1 |
120 mm. |
4.72 inc. |
|
B (ext. Ø) |
Ø 105 mm. |
Ø 4.13 inc. |
|
C |
290 mm. |
11.42 inc. |
|
Thread |
Ø 120 mm. |
Ø 4.72 inc. |
LS SERIES
SERIE LS control PH integrado
SERIE LS control PH REDOX integrado
TECHNICAL DATA
Operating voltage 230 V ac 50/60 Hz.
Watt consumption 50 W (9 Amp)
Output (Adc) 5 Volt.
Production gr Cl-/hr 13
m3 max. pool 22º C 50
Minimum flow rate m3/h 6 m3/h
Maximum pressure 7.5 Kg/cm2 105 PSI
No. of electrode plates 2L
Connection to pipe Ø 50mm and 63mm
Operating voltage 230 V ac 50/60 Hz.
Watt consumption 90 W (18 Amp)
Output (Adc) 5 Volt.
Production gr Cl-/hr 25
m3 max. pool 22º C 80
Minimum flow rate m3/h 10 m3/h
Maximum pressure 7.5 Kg/cm2 105 PSI
No. of electrode plates 4S
Connection to pipe Ø 50mm and 63mm
Operating voltage 230 V ac 50/60 Hz.
Watt consumption 115 W (22 Amp)
Output (Adc) 5 Volt.
Production gr Cl-/hr 34
m3 max. pool 22º C 120
Minimum flow rate m3/h 15 m3/h
Maximum pressure 7.5 Kg/cm2 105 PSI
No. of electrode plates 4L
Connection to pipe Ø 50mm and 63mm
Operating voltage 230 V ac 50/60 Hz.
Watt consumption 150 W (30 Amp)
Output (Adc) 5 Volt.
Production gr Cl-/hr 45
m3 max. pool 22º C 180
Minimum flow rate m3/h 18 m3/h
Maximum pressure 7.5 Kg/cm2 105 PSI
No. of electrode plates 6S
Connection to pipe Ø 50mm and 63mm
Salinity
- 1 g/l – 4 g/l.
- 2 g/l recommended.
Gas flow detector
- Always active.
- Automatic stop of the equipment.
- It is not effective in closed bypasses.
Flow detector by flow switch
- Optional.
- Requires function in the purchase.
- Automatic flow switch detection.
Production control
- Digital control from 1% to 100%.
- 100 production levels.
- 100% hyperchlorination with automatic shut-off.
Polarity reversal
- Configurable by digital menu.
- 1h, 2h, 3h and 4h.
Electrode diagnostics
- Displayed information on the approximate percentage of remaining electrode life.
pH dosing control
- Yes.
- Controlled dosing every hour with the dosing time of the reducing agent depending on the water treatment capacity of each unit.
- The equipment will not dose above pH 9 as this may be due to a probe reading error.
Salinity Control
- Continuous reading of the salt level in water in g/l.
- Accurate with water temperatures between 21º and 23º C.
- The precision temperature KIT can be ordered at any time.
Salt alarm indicator
- Yes.
- It will warn on the display below 5 g/l.
- It will invite you to add more salt to the water by indicating the amount needed.
Salt chlorination LMG SERIES
|
Cota |
Millimeters |
Inches |
|
A (ext. Ø) |
Ø 63 mm. |
Ø 2.48 inc. |
|
A (Ø int.) |
Ø 50 mm. |
Ø 1.97 inc. |
|
A1 |
120 mm. |
4.72 inc. |
|
B (ext. Ø) |
Ø 105 mm. |
Ø 4.13 inc. |
|
C |
290 mm. |
11.42 inc. |
|
Thread |
Ø 120 mm. |
Ø 4.72 inc. |
LMG SERIES
LMG SERIES integrated PH control
SERIE LMG control PH REDOX integrado
TECHNICAL DATA
Operating voltage. -230 V ac 50/60 Hz.
Output (Adc). -5 Volt.
max. pool m3 22º C. -50
Maximum pressure. -7.5 Kg/cm2 105 PSI
Connection to pipeline. -Ø 50mm and 63mm
Watt consumption. -50 W (9 Amp)
Production gr Cl-/hr. -14
Minimum flow rate m3/h. -6 m3/h
No. of electrode plates. -2L
Operating voltage 230 V ac 50/60 Hz.
Watt consumption 90 W (18 Amp)
Output (Adc) 5 Volt.
Production gr Cl-/hr 25
m3 max. pool 22º C 80
Minimum flow rate m3/h 10 m3/h
Maximum pressure 7.5 Kg/cm2 105 PSI
No. of electrode plates 4S
Connection to pipe Ø 50mm and 63mm
Operating voltage 230 V ac 50/60 Hz.
Watt consumption 115 W (22 Amp)
Output (Adc) 5 Volt.
Production gr Cl-/hr 34
m3 max. pool 22º C 120
Minimum flow rate m3/h 15 m3/h
Maximum pressure 7.5 Kg/cm2 105 PSI
No. of electrode plates 4L
Connection to pipe Ø 50mm and 63mm
Operating voltage 230 V ac 50/60 Hz.
Watt consumption 150 W (30 Amp)
Output (Adc) 5 Volt.
Production gr Cl-/hr 45
m3 max. pool 22º C 180
Minimum flow rate m3/h 18 m3/h
Maximum pressure 7,5 Kg/cm2 105 PSI
No. of electrode plates 6S
Connection to pipe Ø 50mm and 63mm
Operating voltage 230 V ac 50/60 Hz.
Watt consumption 175 W (52 Amp)
Output (Adc) 5 Volt.
Production gr Cl-/hr 52
m3 max. pool 22º C 220
Minimum flow rate m3/h 20 m3/h
Maximum pressure 7.5 Kg/cm2 105 PSI
No. of electrode plates 6L
Connection to pipe Ø 50mm and 63mm
Salinity
- 4 g/l – sea water.
- 6 g/l recommended.
Flow detector
- Always active.
- Automatic stop of the equipment.
- It is not effective in closed bypasses.
Flow detector by flow switch
- Optional.
- Requires function in the purchase.
- Automatic flow switch detection.
Production control
- Digital control from 1% to 100%.
- 100 production levels.
- 100% hyperchlorination with automatic shut-off.
Polarity reversal
- Configurable by digital menu.
- 1h, 2h, 3h and 4h.
Electrode diagnostics
- Displayed information on the approximate percentage of remaining electrode life.
pH dosing control
- Yes.
- Controlled dosing every hour with the dosing time of the reducing agent depending on the water treatment capacity of each unit.
- The equipment will not dose above pH 9 as this may be due to a probe reading error.
Salinity Control
- Continuous reading of the salt level in water in g/l.
- Accurate with water temperatures between 21º and 23º C.
- The precision temperature KIT can be ordered at any time.
Salt alarm indicator
- Yes.
- It will warn on the display below 5 g/l.
- It will invite you to add more salt to the water by indicating the amount needed.
