Breathe clean air
and healthy
in your pool
DEHUMIDIFIERS
Comfort and Health
DPM and DPE dehumidifiers are high performance devices particularly suitable for swimming pools, but also for any environment where the humidity level must be controlled.
DEHUMIDIFIERS
CHARACTERISTICS
TECHNIQUES
- The installation must comply with current legislation.
- Refrigerant liquid R410a
- HP Protection
- Electronic controller and digital display
They are designed for easy installation without special requirements: wall mounting and 230V / 50Hz power supply.
CHARACTERISTICS
TECHNIQUES
ACCESSORIES
AVAILABLE
– Built-in electronic temperature and humidity probe
– Remote hygrostat
– Hygrostat + remote thermostat
– Electric heating coil
– Hot water coil and regulating valve
– Partial heat recovery by condenser
CHARACTERISTICS
- Self-supporting frame with removable panels.
- Galvanized steel panels with epoxy paint.
- Standard G5 air filter made of synthetic fibers (not electrostatic), removable and cleanable.
- All DPG machines come standard with an electronic control that controls:
-
- Compressor operation,
- Defrost cycles,
- Air humidity management,
- Air heating,
- Alarms.
REGRIGERATION CIRCUIT
The circuit, manufactured entirely in Italy, complies with ISO 97/23 and includes the following elements:
-Thermostatic pressure regulator
-Safety devices conforming to PED standard,
-Scroll compressor
-Condenser and evaporator with anti-corrosion treatment
-Automatic defrosting probe
ELECTRICAL AND ELECTRONIC
-Themachines are equipped with Carel controllers that allow full control of the machine through a single microprocessor system.
-Theprobe installed in the reprisal allows accurate display of temperature and humidity in a range from 0° to 50° and from 10% to 90% humidity.
-Theelectrical panel complies with EC directives EC.
-Eachcomponent has its own electrical protection.
BODYWORK
All DPG-DFs are made of hot-dip zinc-treated steel panels coated with epoxy/polyurethane paint for superior corrosion resistance.
The condensate collection tray is made of stainless steel.
ENERGY RECOVERY
Static cross-flow system with corrosion resistant painted aluminum plates with stainless steel condensate collection tray.
VENTILATION
All fans used are fans with speed variation (EC or brushless type), with anti-corrosion treatment and electronically regulated to reduce noise and improve performance.
OUTSIDE AIR REGISTER AND FILTERS
The automatic register is made of aluminum, nylon and is regulated electronically.
The apparatus are equipped with G5 class filters with synthetic fibers, easy to disassemble.
CHARACTERISTICS
TECHNIQUES
VENTILATION
HEATERS
The electric heater always provides the same heating power whatever the climatic conditions.
HET 30 to HET 120
HET 03 to HET 24
EOV
ADVANTAGES
- The heater body is made of PVC-C (EOV) or Titanium (HET). This allows for easier installation.
- PVC-C is a material much more resistant to temperature than classic PVC (which resists up to 90º), and perfectly adapted.
- The heating element (the heating element) is made of titanium to withstand any type of water treatment.
- The principle of the electric heater allows it to always offer the same amount of energy whatever the weather conditions.
- The 3 kW, 6kW and 9kW models can be installed either in single-phase at 230V or in three-phase at 400V (by removing a pre-installed connection comb).
CHARACTERISTICS
TECHNIQUES
ACCESSORIES
- Thermostat from 0°C to 35°C manually adjustable (”24kW) or electronic (>24kW).
- Thermal protection fuses:
- > manual reset for resistors
- >automatic reset for the electrical panel (> 24 kW)
- >automatic reset for the heater body (> 24 kW)
- Water flow detector
- Schneider Electric Switchgear
- Wall brackets
EXCHANGERS
THE SPRING – FALL SOLUTION
Its operation allows you to extend the use of your pool from April to October with water at 28°C!
ADVANTAGES
- Installed in the boiler room, ECHT multi-tube heat exchangers use the domestic heating circuit to heat the pool water.
- They can be connected to a water network of gas boiler, fuel oil, hydraulic wood fireplace or heat pump.
- The detector turns on when the pool circulation pump is running.
-
Each heat exchanger is delivered as is (without pump and control thermostat). A regulation kit can be installed on each device, which includes:
-Digital control thermostat,
-Display of water temperature at +/- 0.5º,
-Integrated heating priority function,
-Alarm for lack of flow.
