SONDAS

DOSAGE

RECIRCULATION

RX-CL CALCULATION

AIR QUALITY

MANAGEMENT OF
HYDROSMART INDICATORS

PROBE CONTROL

HidroSmart uses a SEMAPHROGRAPHIC CODE to know the status of each indicator, taking as a reference the values established by current regulations and forcing the system to work within these values.

Ph CALIBRATION

HidroSmart allows us to make the PH calibration The hot calibration using photometric methods allows us to set the calibration value of a photometer up to a difference of 0.9 with respect to what we mark, above 0.9 we will have to do the standard calibration with calibration buffers.
Allows hot Ph calibration, using photometric methods or buffer solution 7 and 9.

REDOX

Allows hot Rx calibration, using photometric methods or 468Rx and 650Rx buffer solution.
The ORP pump operates by giving priority to the Ph set point. With Ph values outside the set point, the pump stops.
We use two points, the 468 and the 650, so the calibration is much more reliable.

FREE CHLORINE

HidroSmart supports potentiostatic and amperometric probes.

TEMPERATURE

Water temperature measurement.

CONDUCTIVITY

HidroSmart allows us to make the PH calibration The hot calibration using photometric methods allows us to set the calibration value of a photometer up to a difference of 0.9 with respect to what we mark, above 0.9 we will have to do the standard calibration with calibration buffers.

TURBIDITY

We use two points, the 468 and the 650, so the calibration is much more reliable.

CALCULATED CHLORINE

Calculated as a function of Ph, Redox and Temperature.

WARNING INDICATOR

Remote fault indicator

CONTROL OF ANY
SYSTEM DISINFECTION

Simultaneous control of different disinfection systems
Control of peristaltic and electromagnetic metering pumps
Control of auxiliary pumps
Control of the level of the liquids in the bottles. The pump stops automatically when there is no contact between the liquid and the probe.

DOSAGE

The dosing of the pool liquids is carried out according to the compliance with the regulations and the programming that the Maintenance Director wants to do for each indicator, being the equipment designed to dispense the maximum of the chemical product in the water.

AUXILIARY DOSING

We use two points, the 468 and the 650, so the calibration is much more reliable.

DISINFECTION

Within the same Central Unit, we can use different disinfection systems simultaneously in order to, among other things, dispense with 100% of the disinfectant chemical product. The electrodes can be either HidroSmart’s own or from other manufacturers.

We can combine the following disinfection systems as we wish or according to our needs:

SALT ELECTROLYSIS

By adding salt to the water, between 2 and 6 Kgr/m3 at low salinity, we generate healthy chlorine in a natural way.

By passing the water through the disinfection chamber, applying low voltage electric currents, we decompose the salt molecule, which as we know is sodium chloride, to generate chlorine.

When the decomposed molecule reaches the pool tank, the chlorine performs its disinfection function until a sodium molecule is found again to associate and re-form the salt, in a continuous cycle.

HYDROLYSIS

Without salt or chemicals we can have an ecological and healthy water , purer than tap water.

Once our disinfection chamber containing the electrodes is installed, we pass the water through it. By applying low voltage electric currents, we decompose water into all its components.

Several compounds are generated inthis process:

Ion Hidroxilo. El mejor desinfectante que existe después del flúor (el flúor no es compatible con la salud), el Ion Hidroxilo es tres veces más potente que el cloro.
Oxygen: The best natural disinfectant. It helps us to reduce chloramines and to stabilize and reduce the PH of the water.
Hydrogen Ion and Hydrogen: The latest medical advances highlight the health benefits of hydrogenated water for its anti-oxidative effect on the body’s cells.

COPPER IONIZATION

Copper ionization has been used since ancient times.

Egyptians, Greeks, Romans, Vikings and other civilizations used it in their daily life to disinfect water, hence the custom of throwing copper coins into water fountains, since copper is the best disinfectant that exists.

In addition to its bactericidal and flocculant effects, it isvery effective against legionella and biofilm in pipes.

The latest studies highlight its effectiveness against COVID,in fact there are UCIS whose furniture has been replaced by copper furniture.

By passing the water through the disinfection chamber, which contains a 100% natural copper electrode, and applying a small electric current, we deliver copper to the water, nevermore than 0.7 ppm electronically controlled, accordingto WHO at 0.5 ppm 99% of bacteria are dead.

We always fall far short of the maximum allowable copper in drinking water, which is 2 ppm.

ULTRAVIOLET

It is known that ultraviolet light is beneficial against viruses and bacteria. It isnaturally present in solar radiation.

Wehave allheard our grandparents talk about sunbathing in case of illness.

With the advancement of technology it is possible to manufacture lamps of different ultraviolet wavelengths or radiation. We pass the water through an opaque disinfection chamber, which contains the ultraviolet emitting lamp. This lamp attacks the DNA structure of viruses and bacteria and prevents their development.

Special lamps are available to attack bacteria or specific contamination for industrial and sewage treatment plant use, and to remove chlorine from water.

RECIRCULATION

From the RECIRCULATION screen we will be able to control:

Select the program we want the equipment to work with.
Check the drive pump.
Control frequency inverters.
Select the light program.
Check the heat pump.
Program the automatic cleaning of the filters if we have automatic valves.
Recirculation flow control.
Turn recirculation off and on.

CALCULATED CHLORINE EQUIVALENCY CHART

We can calculate in values and on thefree chlorine equivalence graph, the value of calculated chlorine as a function of pH, ORP and temperature.

This value is very close to the actual value of free chlorine in the pool. With this we can make chlorine dosage, instead of relying on the free chlorine probe, depends on the calculated chlorine value given by the equipment, so we can have a very approximate value of free chlorine. without having to spend the money in a probe amperometric or potentiostatic.

AIR QUALITY

Control of environmental values wirelessly (wifi).

Indoor relative humidity.
Indoor temperature of the premises.
CO2
Polluting gases that we have in the air.

Depending on the values of CO2 or volatile gases, we will know the air quality and we will know if ventilation is necessary, this can be activated automatically by controlling these values.

It will only trigger the ventilation or poor air quality alarm if both parameters are negative at the same time.